.375 Raptor Custom Stainless Steel Barrel

• Gas Block Journal *

  .750 (Standard).875.936

• Add Gas Block *

  No Thanks.750 Stainless (Standard) + $32.00.750 Steel (Standard) + $26.00.875 Steel + $26.00.936 Steel + $26.00Superlative Arms Adj Gas Block + $95.00Riflespeed Gas System + $205.00
•  Gas Block Disclaimer (You must check the acknowledgment box) *

  Not all Gas Blocks will work with all barrel configurations. If you order a barrel under 9" with a "Q" taper you a WILL NOT be able to use a Rifle Speed gas system. If you order a barrel under 6" the Superlative Arms Gas Block will not work. If you have questions just ask! We are glad to talk to you! (480) 440-1878

• Gas System Length *

  CarbineMidRifleRifle+1Rifle+2

• Add Gas Tube *

  No ThanksMid + $16.50Rifle + $17.50Rifle+1 + $21.00Rifle+2 + $22.00

• Crown/Muzzle *

  5/8x24 Thread Flat Target5/8x24 Thread with 11° Crown + $15.0011° Crown No Threads + $15.0011/16x24 Thread Flat Target11/16x24 Thread with 11° Crown + $15.003/4x24 Thread Flat Target Crown3/4x24 Thread with 11° Crown + $15.00

Adding Nitride or Cerakote to your barrel will extend your lead time out 2-4 weeks depending on our vendor lead time.

• Barrel Finish Options *

  StandardPolished + $50.00Nitride Black + $50.00Graphite Black (Flat) Cerakote + $50.00Elite Black (Shiny) Cerakote + $50.00Titanium Cerakote + $50.00FDE Cerakote + $50.00McMillan Tan Cerakote + $50.00Burnt Bronze Cerakote + $50.00O.D. Green Cerakote + $50.00Noveske Bazooka Green Cerakote + $50.00Sniper Gray Cerakote + $50.00Sniper Green Cerakote + $50.00

  Adding an exterior process to your barrel will increase your lead time 2-4 weeks.

•  Cryogenics * + $100.00

  Cryogenics will add 2 weeks to your barrel lead time.

•  Sig/Q Taper * + $25.00

  This 25° Taper is made for specific muzzle devices and suppressors. You will know if you need one.

• Add Head-Spaced Bolt/BCG * $0.00

  I will send in my own bolt to headspace to my barrel + $15.00Add a Head-Spaced Bolt + $95.00Make it a Complete BCG + $165.00

Some of our most common gunsmithing services. We do others...just ask!

•  Assemble Complete Upper with My Parts * + $125.00

  You send us your components and we will send you back a complete upper receiver. Test fired and ready to go! We've got the tools! Put the guys to work!

•  Perfect Fit * + $45.00

  Do you like a "Seamless Transition"? Send us your hand-guard and suppressor so we can make your barrel the exact length to hide the transition from barrel to suppressor. You don't need to use an FFL, we can accept your suppressor as "Gunsmithing". Easy!

•  Double Dimple * + $40.00

  We dimple our barrels! If you want a second dimple we can do that! Send us your gas block for correct placement, or purchase one from us!

•  Gas Block Pin It! * + $45.00

  We can pin your gas block to your barrel...in fact we will if that helps you out! We will drill it, then you can set the pin, or if you'd rather you can send us your barrel nut and gas block and we will install it.

•  Pin & Weld Muzzle Device * + $75.00

  We will install your muzzle device on your barrel then pin and weld it. It’s not going anywhere!

We won't over promise and under deliver...We'd rather send your barrel to you early, then have it be past our estimated lead time. Machining a quality barrel takes time. We can't speed up the machines in order to lessen lead times, so we will keep making quality and increase lead times. We apologize for the waits, and hope you will be willing to wait while we make you the best barrel we can. You are welcome to call with any questions! We are always glad to talk to you!

•  Lead Times are Currently 25 Weeks *

If you are shipping there is a tab at the top of the site page that will give you those instructions. If you have any questions give us a call! (480) 440-1878

• Comments *

  Max: 2000 characters