Custom 400 Legend Premium Barrel Stainless

• Gas Block Journal *

  .875.936

• Add Gas Block *

  No ThanksAdd .875 Steel Nitride Gas Block + $26.00Add .936 Steel Nitride Gas Block + $26.00Add Superlative Arms Adj Gas Block + $95.00

  Steel Gas Block

• Gas System Length *

  CarbineMid-Length

  If you are unsure of the gas length you need select the one you think is correct, if we need to make a change we will contact you.

• Add Gas Tube *

  No Thanks + $0.00Carbine Length + $15.50Mid-Length + $16.50

400 Legend is a high pressure round. Due to safety concerns we do not offer this round in a 5/8x24 muzzle. If you have questions or want to speak to a gunsmith about this feel free to call (480) 440-1878

• Crown/Muzzle *

  11/16X24 Flat Target11/16x24 Threaded 11° Crown + $15.003/4x24 Flat Target3/4x 24 Threaded 11° Crown + $15.0011° Crown No Thread + $15.00

Adding Nitride/Cerakote to your barrel will extend your lead time out depending on our vendor lead times (Generally 2-3 weeks).

• Barrel Finish Options *

  Standard Bead Blast (Matte Finish)Polished + $50.00Nitride Black + $50.00Graphite Black (Flat) Cerakote + $50.00Elite Black (Shiny) Cerakote + $50.00Titanium Cerakote + $50.00FDE (Flat Dark Earth) Cerakote + $50.00McMillan Tan Cerakote + $50.00Burnt Bronze Cerakote + $50.00O.D. Green Cerakote + $50.00Noveske Bazooka Green Cerakote + $50.00Sniper Gray Cerakote + $50.00Sniper Green Cerakote + $50.00
•  Cryogenics * + $100.00

  Cryogenics will add 2 weeks to your production time.

• Add a 400 Legend Head-Spaced/Tuned Bolt *

  No Thanks + $0.00Add a 6.8 SPC Head-Spaced Bolt + $95.00Add a 6.8 SPC Complete Head-Spaced BCG + $160.00I Will Send in my Bolt to be Head-Spaced + $15.00

  This bolt will be polished, head-spaced and test-fired with your barrel. This is a critical part of cycling with the 350/400 Legend. We strongly recommend you purchase a bolt, or if you would like to send yours in, we will polish it for you. Please make sure your bolt is clearly marked with your name and order number.

These are a few common services we offer. We offer full gunsmithing options too. Check out our Gunsmithing Section!

•  Assemble Complete Upper with my Parts * + $125.00

  You send us your components and we will send you back a complete upper receiver. Test fired and ready to go! We've got the tools! Put the guys to work!

•  Perfect Fit * + $45.00

  Do you like a "Seamless Transition"? Send us your hand-guard and suppressor so we can make your barrel the exact length to hide the transition from barrel to suppressor. You don't need to use an FFL, we will accept your suppressor as "Gunsmithing". Easy!

•  Double Dimple * + $40.00

  We dimple our barrels! If you want a second dimple we can do that! Send us your gas block for correct placement, or purchase one from us! $40

•  Gas Block...Pin It * + $45.00

  We can pin your gas block to your barrel...in fact we will if that helps you out! We will drill it, then you can set the pin, or if you'd rather you can send us your barrel nut and gas block and we will install it.

•  Pin & Weld Muzzle Device * + $75.00

  We will install your muzzle device on your barrel then pin and weld it. It’s not going anywhere!

•  Current Lead Times are 25 Weeks *

  We won't over promise and under deliver...We'd rather send your barrel to you early, then have it be past our estimated lead time. Machining a quality barrel takes time. We can't speed up the machines in order to lessen lead times, so we will keep making quality and increase lead times. We apologize for the waits, and hope you will be willing to wait while we make you the best barrel we can. You are welcome to call with any questions! We are always glad to talk to you!

If you are shipping something to us there is a tab at the top of this page that will give you all the information you need. If you have any questions give us a call! (480) 440-1878

• Comments *

  Max: 2000 characters